Leveling The Unit - Montigo 34FIDN-S-F [NG] Installation And Maintenance Manual

I-Series Indoor Gas Fireplace
Installation

Leveling the Unit

This unit has 4 leveling screws, 2 located inside the rear of the
firebox and 2 located at the bottom front of the Rear Faceplate.
Once the unit is in position, you can use a Phillips screw driver or
Slotted screw drivers to adjust each leveling screw as required.
1). Remove burner, see section on burner removal and install
2). Rear leveling screw adjustment (Linear burner version shown)
Figure 4 Sec.8
3). Front leveling Screw adjustment (Linear burner version shown)
Figure 5 Sec.8
4). Reinstall the burner.
Page 30
XG0508- 150204