Remote Administration; Part I - Setup A Dyndns Account; Part Ii - Enable Ddns On The Router; Part Iii - Setting Up Virtual Servers (Https) - Thecus VisoGuard V2510 User Manual

Before attaching an eSATA or USB disk drive to Thecus VisoGuard, you have to
partition and format it on a desktop computer or a notebook first. The attached
device will be located at \\192.168.1.100\usbhdd\sd(x)1 where 192.168.1.100
means the IP address of Thecus VisoGuard and sd(x)1 stands for the first partition
on the eSATA or USB disk drive.

Remote Administration

You can set up your Thecus VisoGuard for remote administration. With remote
administration, you can access your Thecus VisoGuard over the Internet, even if
your Thecus VisoGuard is behind a router. This is especially useful if you are
traveling and suddenly need a file from your Thecus VisoGuard.
Setting up remote administration is a three-part process, and will require the
following equipment:
Thecus VisoGuard device
•
Cable / DSL Router with Dynamic DNS support
•
Home PC
•
Internet Connection
•
NOTE

Part I - Setup a DynDNS Account

1. Go to http://www.dyndns.org from your home PC.
2. Click on the Sign Up Now link.
3. Check the Check boxes, select a user name (i.e.: N
address (i.e.: xxx@example.com), check Enable Wildcard, and create a
password (i.e.: xxxx).
4. Wait for an email from www.dyndns.org.
5. Open the email and click on the link to activate your account

Part II - Enable DDNS on the Router

1. Go to the router setup screen and select IP Config > Miscellaneous
DDNS Setting from your Home PC.
2. Click on Yes for Enable the DDNS Client?
3. Select www.dyndns.org.
4. Go to router setup screen, and enter the following information:
a. User Name or E-mail Address: xxx@example.com
b. Password or DDNS Key: xxxx
c. Host Name: www.N
d. Enable wildcard? Select Yes
e. Update Manually: Click Update

Part III - Setting up Virtual Servers (HTTPS)

1. Navigate to NAT Setting > Virtual Server.
2. For Enable Virtual Server?, select Yes
3. Setup the HTTPS Server
a. Well-Known Applications: Select User Defined
b. Local IP: Enter 192.168.1.100
Router setup will differ slightly depending on router used. For this example,
we will use the Asus WL500g because it has support for Dynamic DNS.
Contact your router hardware vendor for setup help.
. dyndns.org
1 2 0 0 0 1 2 0 0 0
1 2 0 0 0 1 2 0 0 0
72
) , enter your email
1 2 0 0 0