Safety Warnings - Thecus VisoGuard V2510 User Manual

Safety Warnings

For your safety, please read and follow the following safety warnings:
Read this manual thoroughly before attempting to set up your Thecus
VisoGuard.
Your Thecus VisoGuard is a complicated electronic device. DO NOT attempt
to repair it under any circumstances. In the case of malfunction, turn off the
power immediately and have it repaired at a qualified service center.
Contact your vendor for details.
DO NOT allow anything to rest on the power cord and DO NOT place the
power cord in an area where it can be stepped on. Carefully place
connecting cables to avoid stepping or tripping on them.
Your Thecus VisoGuard can operate normally under temperatures between
5°C and 40°C, with relative humidity of 20% – 85%. Using Thecus
VisoGuard under extreme environmental conditions could damage the unit.
Ensure that the Thecus VisoGuard is provided with the correct supply
voltage (AC 100V ~ 240V, 50/60 Hz). Plugging the Thecus VisoGuard to an
incorrect power source could damage the unit.
Do NOT expose Thecus VisoGuard to dampness, dust, or corrosive liquids.
Do NOT place Thecus VisoGuard on any uneven surfaces.
DO NOT place Thecus VisoGuard in direct sunlight or expose it to other heat
sources.
DO NOT use chemicals or aerosols to clean Thecus VisoGuard. Unplug the
power cord and all connected cables before cleaning.
DO NOT place any objects on the Thecus VisoGuard or obstruct its
ventilation slots to avoid overheating the unit.
Keep packaging out of the reach of children.
If disposing of the device, please follow your local regulations for the safe
disposal of electronic products to protect the environment.
3