Config Mgmt; Factory Default - Thecus VisoGuard V2510 User Manual

There is also password for enter OLED setting you could setup here. Enter a new
password in the New Password box and confirm your new password in the
Confirm Password box. Press Apply to confirm password changes.
See the following table for a detailed description of each item.
Change Administrator and LCD Entry Password
Item
New Password
Confirm Password
Apply

Config Mgmt

From the menu, choose the Config Mgmt item and the System Configuration
Download/Upload screen appears. From here, you can download or upload
stored system configurations.
See the following table for a detailed description of each item.
System Configuration Download/Upload
Item
Download
Upload
NOTE

Factory Default

From the menu, choose the Factory Default item and the Reset to Factory
Default screen appears. Press Apply to reset Thecus VisoGuard to factory default
settings.
Description
Type in a new administrator password.
Type the new password again to confirm.
Press this to save your changes.
Description
Save and export the current system configuration.
Import a saved configuration file to overwrite current system
configuration.
Backing up your system configuration is a great way to ensure that you can revert
to a working configuration when you are experimenting with new system settings.
The system configuration you have backup can be only restore in same firmware
version. And the backup details have excluded user/group accounts.
39