Table of Contents
Advertisement
NOTE
3. Specify a RAID ID.
4. Quick RAID — Enabled the quick RAID setting is going to enhance RAID
creation time.
NOTE
5. Specify a stripe size — 64K is the default setting.
6. Selected the file system you like to have for this RAID volume. The selection
is available from
NOTE
7. Press Submit to build the RAID storage volume.
Thecus VisoGuard Series only supports single RAID
sysetm.
We recommend is "Quick RAID" setting is going to be used, only if hard disk
is brand new or it has no existed partitions contained.
XFS
.
Single volume size supported:XFS
52
48TB
Advertisement
Table of Contents
