Remote Administration; Part I - Setup A Dyndns Account; Part Ii - Enable Ddns On The Router; Part Iii - Setting Up Virtual Servers (Https) - Thecus 1U4500R User Manual

Remote Administration

You can set up your 1U4500 for remote administration. With remote
administration, you can access your 1U4500 over the Internet, even if your
1U4500 is behind a router. This is especially useful if you are traveling and
suddenly need a file from your 1U4500.
Setting up remote administration is a three-part process, and will require the
following equipment:
Thecus 1U4500 NAS device
•
Cable/DSL Router with Dynamic DNS support
•
Home PC
•
Internet Connection
•
NOTE

Part I - Setup a DynDNS Account

1. Go to http://www.dyndns.org from your home PC.
2. Click on the Sign Up Now link.
3. Check the Check boxes, select a user name (i.e.: 1U4500), enter your
email address (i.e.: xxx@example.com), check Enable Wildcard, and
create a password (i.e.: xxxx).
4. Wait for an email from www.dyndns.org.
5. Open the email and click on the link to activate your account

Part II - Enable DDNS on the Router

1. Go to the router setup screen and select IP Config > Miscellaneous
DDNS Setting from your Home PC.
2. Click on Yes for Enable the DDNS Client?
3. Select www.dyndns.org.
4. Go to router setup screen, and enter the following information:
a. User Name or E-mail Address: xxx@example.com
b. Password or DDNS Key: xxxx
c. Host Name: www.1U4500.dyndns.org
d. Enable wildcard? Select Yes
e. Update Manually: Click Update

Part III - Setting up Virtual Servers (HTTPS)

1. Navigate to NAT Setting > Virtual Server.
2. For Enable Virtual Server?, select Yes
3. Setup the HTTPS Server
a. Well-Known Applications: Select User Defined
b. Local IP: Enter 192.168.1.100
c. Port Range: 443 (the default HTTPS port setting on the 1U4500)
d. Protocol: select TCP
e. Click Add.
f. Click Apply.
4. Test the HTTPS connection from another computer on the Internet
a. From a remote computer, open your browser and enter
https://www.1U4500.dyndns.org
Router setup will differ slightly depending on router used. For this example, we will
use the Asus WL500g because it has support for Dynamic DNS. Contact your router
hardware vendor for setup help.
54