Safety Warnings - Thecus N0204 miniNAS User Manual

Safety Warnings

For your safety, please read and follow the following safety warnings:
Read this manual thoroughly before attempting to set up your N0204
miniNAS.
Your N0204 miniNAS is a complicated electronic device. DO NOT attempt to
repair it under any circumstances. In the case of malfunction, turn off the
power immediately and have it repaired at a qualified service center. Contact
your vendor for details.
DO NOT allow anything to rest on the power cord and DO NOT place the
power cord in an area where it can be stepped on. Carefully place connecting
cables to avoid stepping or tripping on them.
Your N0204 miniNAS can operate normally under temperatures between 0°C
and 40°C, with relative humidity of 20% – 85%. Using the N0204 miniNAS
under extreme environmental conditions could damage the unit.
Ensure that the N0204 miniNAS is provided with the correct supply voltage
(AC 100V ~ 240V, 50/60 Hz, 5V/3A). Plugging the N0204 miniNAS to an
incorrect power source could damage the unit.
Do NOT expose the N0204 miniNAS to dampness, dust, or corrosive liquids.
Do NOT place the N0204 miniNAS on any uneven surfaces.
DO NOT place the N0204 miniNAS in direct sunlight or expose it to other heat
sources.
DO NOT use chemicals or aerosols to clean the N0204 miniNAS. Unplug the
power cord and all connected cables before cleaning.
DO NOT place any objects on the N0204 miniNAS or obstruct its ventilation
slots to avoid overheating the unit.
Keep packaging out of the reach of children.
If disposing of the device, please follow your local regulations for the safe
disposal of electronic products to protect the environment.
3