Subaru Select Monitor - Subaru FORESTER 2001 Service Manual

Engine (Diagnostics)

10. Subaru Select Monitor

A: OPERATION
1. HOW TO USE SUBARU SELECT
MONITOR
S088503A1601
1) Prepare Subaru Select Monitor kit. <Ref. to
EN(DOHC TURBO)-8, PREPARATION TOOL,
General Description.>
2) Connect diagnosis cable to Subaru Select
Monitor.
3) Insert cartridge into Subaru Select Monitor.
<Ref. to EN(DOHC TURBO)-8, PREPARATION
TOOL, General Description.>
4) Connect Subaru Select Monitor to data link
connector.
(1) Data link connector located (A) in the lower
portion of the instrument panel (on the driver's
side).
(2) Connect diagnosis cable to data link con-
nector.
SUBARU SELECT MONITOR
S088503
S088503A16
S2M0285
S2M0286A
S2M2157B
EN(DOHC TURBO)-36
CAUTION:
Do not connect scan tools except for Subaru
Select Monitor and OBD-II general scan tool.
5) Turn ignition switch to ON (engine OFF) and
Subaru Select Monitor switch to ON.
6) Using Subaru Select Monitor, call up diagnostic
trouble code(s) and various data, then record
them.
2. READ DIAGNOSTIC TROUBLE CODE
(DTC) FOR ENGINE. (NORMAL MODE)
S088503A1602
Refer to Read Diagnostic Trouble Code for infor-
mation about how to indicate DTC. <Ref. to
EN(DOHC TURBO)-43, Read Diagnostic Trouble
Code.>
3. READ DIAGNOSTIC TROUBLE CODE
(DTC) FOR ENGINE. (OBD MODE)
Refer to Read Diagnostic Trouble Code for infor-
mation about how to indicate DTC. <Ref. to
EN(DOHC TURBO)-43, Read Diagnostic Trouble
Code.>
S2M0288A
S088503A1603