Attaching The Embroidery Frame - Brother 888-G00 Operation Manual

Attaching the Embroidery Frame

Note
• Wind and insert the bobbin before attaching the
embroidery frame making sure to use the
recommended bobbin thread.
a Press (Presser foot lifter button) to raise the presser
foot.
b Raise the frame-securing lever.
1 Frame-securing lever
2 Carriage
Align the embroidery frame guide with the right edge
c
of the embroidery frame holder.
1 Embroidery frame holder
2 Embroidery frame guide
d Slide the embroidery frame into the holder, making
sure to align the embroidery frame's arrow mark with
the one on holder.
1 Arrow mark
Attaching the Embroidery Frame
e Lower the frame-securing lever to be level with the
frame to secure the embroidery frame in the
embroidery frame holder.
CAUTION
• If the frame-securing lever is not lowered, the
following message appears. You cannot start
sewing until you lower the frame-securing
lever.
■ Removing the embroidery frame
a Press (Presser foot lifter button) to raise the presser
foot.
b Raise the frame-securing lever.
c Pull the embroidery frame toward you.
Basic operations B-61
B