Brother 888-G00 Operation Manual page 86

Blind Hem Stitching
■ If the needle does not catch the hem fold
The needle is too far to the right.
Increase the stitch width so that the needle slightly catches
the fold of the hem.
Example: Thick fabric
Example: Normal fabric
1 Wrong side of fabric
2 Right side of fabric
l Sew with the fold of the hem against the presser foot
guide.
m Press the "Start/Stop" button to stop sewing when you
are finished, and raise the presser foot and needle to
remove the fabric by pulling it back.
Note
• Be sure to pull the fabric backward after finished
sewing. If you pull the fabric toward side or
forward, the presser foot may be damaged.
n Remove the basting stitching and reverse the fabric.
1
1 Wrong side of fabric
2 Right side of fabric
S-10
2