Brother 888-G00 Operation Manual page 39

g Thread the upper thread in the same way that the
upper thread for the left side was threaded.
1
1 Thread guide cover
• For details, refer to steps
"Threading the upper thread" on page B-24.
h Without passing the thread through the needle bar
thread guide, manually thread the right needle.
Insert the thread through the eye of the needle from the
front.
• The needle threader cannot be used with the twin
needle. If the needle threader is used with the twin
needle, the machine may be damaged.
i Attach zigzag foot "J".
• For details on changing the presser foot, refer to
"Replacing the presser foot" on page B-33.
CAUTION
• When using the twin needle, be sure to attach
zigzag foot "J". If bunched stitches occur, use
presser foot "N" or attach stabilizer material.
j Turn on the machine and select a stitch.
• For stitch selection see "Sewing a stitch" on page B-
35.
• See "Stitch Setting Chart" on page B-47 for stitches
that use a twin needle.
CAUTION
• When using the twin needle, be sure to select
an appropriate stitch, otherwise the needle
may break or the machine may be damaged.
k Press to display the settings screen.
l Set "Twin Needle" to "ON."
g i
through of
m Press .
CAUTION
• When using the twin needle, be sure to select
the twin needle setting, otherwise the needle
may break or the machine may be damaged.
Start sewing.
n
• For details on starting to sew, refer to "STARTING TO
SEW" on page B-35.
→ Two lines of stitching are sewn parallel to each other.
Note
• When changing the sewing direction, press
(Needle position button) to raise the needle from
the fabric, and then raise the presser foot lever
and turn the fabric.
CAUTION
• Do not try turning the fabric while the twin
needle is down in the fabric, otherwise the
needle may break or the machine may be
damaged.
Upper Threading
Basic operations B-29
B