Stitch Setting Chart - Brother 888-G00 Operation Manual

Stitch Setting Chart

Applications, stitch lengths and widths and whether the twin needle can be used are listed for utility stitches in the
following table.
Memo
• The stitches shown in the table below may differ slightly from the stitch patterns displayed in the LCD.
*1
For free motion quilting, use free motion open toe quilting foot "O".
*2
For free motion quilting, use free motion quilting foot "C" (sold separately with some models) or free motion open toe quilting
foot "O".
*3
When the Automatic reverse/reinforcement key is activated, the stitch will begin with reinforcement stitch. If "Reinforcement
Priority" on page 3 of the settings screen is also set to "ON", the machine will sew reinforcement stitches at the end of
stitching and then stop.
Note
• Do not sew reverse stitching when using the walking foot.
Stitch
Stitch Stitch name
number
Straight stitch
1-01 (Left)
Straight stitch
1-02 (Left)
Straight stitch
1-03 (Middle)
Straight stitch
1-04 (Middle)
Triple stretch
1-05 stitch
Stem stitch
1-06
Decorative
1-07 stitch
Basting stitch
1-08
Zigzag stitch
1-09
Zigzag stitch
1-10
Zigzag stitch
1-11 (Right)
Zigzag stitch
1-12 (Left)
2 steps elastic
1-13 zigzag stitch
3 steps elastic
1-14 zigzag stitch
Presser
Applications
foot
General sewing, gather,
*1
pintuck, etc.
J
General sewing, gather,
*1
pintuck, etc.
J
General sewing, gather,
*1
pintuck, etc.
J
General sewing, gather,
*1
pintuck, etc.
J
General sewing for
*1
reinforcement and
J
decorative topstitching
Reinforced stitching,
*1
sewing and decorative
J
applications
Decorative stitching, top
*1
stitching
N
Basting
*1
J
For overcasting, mending.
*1
J
For overcasting, mending.
*1
J
Start from right needle
*1
position, zigzag sew at
J
left.
Start from left needle
*1
position, zigzag sew at
J
right.
Overcasting (medium
*1
weight and stretch
J
fabrics), tape and elastic
Overcasting (medium,
*1
heavyweight and stretch
J
fabrics), tape and elastic
Stitch width Stitch length
[mm (inch)] [mm (inch)]
needle
Auto. Auto.
Manual Manual
0.0 (0) 2.5 (3/32)
0.0 - 7.0 0.2 - 5.0
(0 - 1/4) (1/64 - 3/16)
0.0 (0) 2.5 (3/32)
0.0 - 7.0 0.2 - 5.0
(0 - 1/4) (1/64 - 3/16)
3.5 (1/8) 2.5 (3/32)
0.0 - 7.0 0.2 - 5.0
(0 - 1/4) (1/64 - 3/16)
3.5 (1/8) 2.5 (3/32)
0.0 - 7.0 0.2 - 5.0
(0 - 1/4) (1/64 - 3/16)
0.0 (0) 2.5 (3/32)
0.0 - 7.0 0.4 - 5.0
(0 - 1/4) (1/64 - 3/16)
1.0 (1/16) 2.5 (3/32)
0.0 - 7.0 0.4 - 5.0
(0 - 1/4) (1/64 - 3/16)
0.0 (0) 2.5 (3/32)
0.0 - 7.0 0.4 - 5.0
(0 - 1/4) (1/64 - 3/16)
0.0 (0) 20 (3/4)
0.0 - 7.0 5 - 30
(0 - 1/4) (3/16 - 1-3/16)
3.5 (1/8) 1.4 (1/16)
0.0 - 7.0 0.0 - 5.0
(0 - 1/4) (0 - 3/16)
3.5 (1/8) 1.4 (1/16)
0.0 - 7.0 0.0 - 5.0
(0 - 1/4) (0 - 3/16)
3.5 (1/8) 1.4 (1/16)
2.5 - 5.0 0.3 - 5.0
(3/32 - 3/16) (1/64 - 3/16)
3.5 (1/8) 1.4 (1/16)
2.5 - 5.0 0.3 - 5.0
(3/32 - 3/16) (1/64 - 3/16)
5.0 (3/16) 1.0 (1/16)
0.0 - 7.0 0.2 - 5.0
(0 - 1/4) (1/64 - 3/16)
5.0 (3/16) 1.0 (1/16)
0.0 - 7.0 0.2 - 5.0
(0 - 1/4) (1/64 - 3/16)
Basic operations B-47
Stitch Setting Chart
Reverse/
Twin Reinforce- Walking
ment foot
stitching
OK
Reverse NO
( J )
OK
*3
OK
Reverse
( J )
OK
Reverse NO
( J )
OK Reinforce-
NO
( J ) ment
OK Reinforce-
NO
( J ) ment
OK Reinforce-
NO
( J ) ment
OK Reinforce-
NO
( J ) ment
Reinforce-
NO NO
ment
OK
Reverse NO
( J )
OK
*3
NO
Reverse
( J )
OK
*3
OK
Reverse
( J )
OK
*3
NO
Reverse
( J )
OK
*3
OK
Reverse
( J )
OK
*3
NO
Reverse
( J )
B