Bases - Rifton Z110 Product Manual

Base height adjustment
To prevent falls and
WARNING
injury, do not adjust
height with user in the product.
To lower the seat, squeeze both height
latches on the frame uprights (see fi gure
9a) while supporting the weight of the
seat. Lower both sides evenly to prevent
binding.
To raise the seat, fl ip up the footboard, put
one foot on the frame cross bar, and pull
up on the seat frame (there is no need to
release the height latches).
Tilt-in-space adjustment
Tip: If adjustment feels tight, then
try with the tilt-in-space all the way
forward or back.
The tilt-in-space adjustment is available
on the Z122 and Z132 bases. Use the tilt
trigger at the right rear of the seat (see
fi gure 9b) to release the two locking gas
springs. Tilt adjusts 15° forward and 15°
back. It is easy to tilt the HTS with the user
in the product.
Casters and stationary feet
The casters and stationary rubber feet can
easily be replaced or exchanged. Simply
pull the caster stem or rubber foot out of
the end cap (see fi gure 9c). Ensure that
replacement casters or feet are inserted to
their full depth.
Caster brakes
To apply the brake, step down on the brake
lever. To release the brake, raise the lever
(see fi gure 9d).
Figure 9a
Tilt trigger
Figure 9b
Figure 9c
Figure 9d
Height
latches
Brake lever
9