Table of Contents
Advertisement
Check your order
Your Rifton HTS has been shipped according to your specifi cations. It will require some
tool-free assembly. Follow these instructions to ensure that your product is assembled
and used correctly. This product manual is comprehensive, and may discuss features not
included in your confi guration of the HTS.
Basic components
A Quick Reference Guide for the HTS can be dowloaded from a QR code on
the back of the backrest.
Tip: Every blue lever or button
indicates a point of adjustment.
Seat depth
The side pieces allow for seat depth
adjustment. Lift the blue latches on both
outer sides (see fi gure 6a), move both sides
together to the desired seat depth and fi nd
a latched position.
This same adjustment will also enable both
sides to slide off the seat towards the front
for cleaning the area underneath.
Backrest angle
The backrest angle can be adjusted 6°
forward, 6° back, and 18° back (see fi gure
6b). Raise both back angle triggers, adjust
to desired angle and release into a latched
position (see fi gure 6c).
6
Seat depth latch
Figure 6a
Backrest
6° -6°
+
removal
Figure 6b
Back angle trigger
Figure 6c
-18°
Advertisement
Table of Contents
