Lateral Supports, Chest Strap - Rifton Z110 Product Manual

Lateral supports
Lateral supports are available with or
without a chest strap for secure upper
trunk positioning. They may be adjusted
separately, in height, angle and width using
the knob (B) behind the backrest.
To attach and/or adjust lateral support
(A), loosen knob (B) and insert the key
(C) into extrusion (D) at the rear of the
backrest. Adjust height, angle and width
of lateral support to fi t client by sliding it
up and down, sliding bracket (E) along its
slot and by rotating bracket (E) around the
knob. When desired adjustment is reached,
tighten knob fi rmly (see Figure 15a).
Chest strap
To prevent falls,
WARNING
strangulation or
other injuries:
• Always use seatbelt when the chest
strap is in use.
• Always ensure that chest strap is
correctly adjusted.
The chest strap threads onto the lateral
supports as shown (see fi gure 15b). The
chest strap should thread to the inside of
the lateral supports (see fi gure 15c).
D
C
B E
Figure 15a
Figure 15b
Figure 15c
A
15