Armrests
To attach the armrest, insert the bottom of
the armrest into the oval slots in the side
pieces and press down fi rmly until it latches
into place (see fi gure 7c).
To remove the armrest, squeeze the release
button (A) and pull the armrest up.
Tip: Armrests of different sizes can
be retrofi tted.
Bases
WARNING
sure both seat hooks are inserted into the
base sockets and that both seat latches
are latched to base.
Attaching the seat
Insert both hooks at the rear of the seat
into the sockets of the frame (see fi gure
8a). Then push front of seat down onto
frame until the latches audibly engage.
Removing the seat
To remove the seat from a base, pull both
seat latches under the front edge of the
seat (see fi gure 8b) and lift it from the
base.
8
To prevent falls and
injuries, always make
A
Figure 7c
Hooks into
socket
Figure 8a
Seat latches
Figure 8b