Portability Base - Rifton Z110 Product Manual

Portability base with
carry-bag
WARNING
• The portable base is intended for
travel use only and should not be used
as the primary base. Ensure adequate
stability when using the portable base.
• Check that the two pieces of the frame
are fully engaged before attaching the
seat.
• Always make sure both seat hooks
are inserted into the base sockets and
that both seat latches at the front are
latched to base.
The

portability base

foldable frame with a carry-bag (see fi gure
20a). This base fi ts in the back pouch of
the carry-bag.
The seat, back, armrests and other
accessories can go into the front pouch of
the carry-bag (see fi gure 20b).
To assemble the base, unfold both halves
of the frame, insert the square peg of
one half into the square tube of the other
half of the frame (see fi gure 20c). Make
sure the two pieces of the frame are fully
engaged before attaching the seat.
Then attach the seat to the frame (see
fi gure 20d) as described on previous page
(see fi gure 19d).
20
To prevent falls and
injuries:
is a light-weight,
Figure 20a
Figure 20b
Figure 20c
Figure 20d