Defl Ectors And Abductor - Rifton Z110 Product Manual

Defl ectors
The standard defl ector inserts into the
slot on the seat pad with the hollow cup of
the defl ector toward the user
(see fi gure 17a).
Tip: Adding the abductor to the
standard defl ector provides stability to
the defl ector (see fi gure 17c).
The splash guard provides even more
coverage. It is held against the user with
the seatbelt or butterfl y harness (see fi gure
17b).
Abductor
The padded abductor inserts into the slot
at the front edge of the seat. It can be
removed by squeezing the blue latch (A)
and pulling the abductor out (see fi gure
17c).
To minimize risk of
CAUTION
infectious disease
transmission, the HTS should be cleaned
and disinfected between uses by
different patients. Inadequate cleaning
and disinfecting of equipment may
increase the risk of cross contamination.
Remove the Polyurethane pads for cleaning
with soapy water or a mild disinfectant.
Ribs in seat pad
Figure 17a standard defl ector
Figure 17b splash guard
Figure 17c
A
17