Hip Guides, Pan And Bowl Adapter - Rifton Z110 Product Manual

Hip guides
The seat width may be adjusted with a pair
of hip guides that attach onto the armrests.
In the fi rst position they reduce the seat
width by 2" (5 cm), and in the second
position they reduce it by 4"(10 cm) (see
fi gure 16a).
Slide the hip guide onto the armrest with
the notch in the hip guide up and back.
Insert the armrest into the armrest slot
through the hip guide.
Pan
The pan (see fi gure 16b) enables the HTS to
be used as a stand-alone commode. Insert
the pan into the tracks under the seat, from
the back of the chair. Push until it latches
into place. Remove it by pulling straight
back (see fi gure 16c).
Bowl adapter
The bowl adapter (see fi gure 16d)
accommodates situations where the hole
in the HTS isn't fully over the hole in the
toilet. It is inserted at the front edge of the
hole, under the seat pad. A seat pad must
be used in conjunction with the
bowl adapter.
16
Notch at back
Figure 16a
Figure 16b
Figure 16c
Figure 16d