Table of Contents
Advertisement
Armrests
Figure 8a:
bottom of the armrest into the oval slots in
the side pieces and press down fi rmly until
it latches into place.
To remove the armrest, squeeze the release
button (A) and pull the armrest up.
Tip: Armrests of different sizes can
be retrofi tted.
Bases
WARNING
sure both seat hooks are inserted into the
base sockets and that both seat latches
are latched to base.
Attaching the seat
Figure 8b:
the seat into the sockets of the frame. Then
push front of seat down onto frame until
the latches audibly engage.
Removing the seat
Figure 8c:
pull both seat latches (B) under the front
edge of the seat, and lift it from the base.
8
To attach the armrest, insert the
To prevent falls and
injuries, always make
Insert both hooks at the rear of
To remove the seat from a base,
A
A
Figure 8a
Hooks into
socket
Figure 8b
Figure 8c
B B
Advertisement
Table of Contents
