Portability Base - Rifton Z110 Product Manual

Portability base with
carry-bag
WARNING
• The portable base is intended for
travel use only and should not be used
as the primary base. Ensure adequate
stability when using the portable base.
• Check that the two pieces of the frame
are fully engaged before attaching the
seat.
• Always make sure both seat hooks
are inserted into the base sockets and
that both seat latches at the front are
latched to base.
Figure 20a:
weight, foldable frame with a carry-bag.
This base fi ts in the back pouch of the
carry-bag.
Figure 20b:
other accessories fi t into the front pouch of
the carry-bag.
Figure 20c:
both halves of the frame, insert the square
peg of one half into the square tube of
the other half of the frame. Make sure the
two pieces of the frame are fully engaged
before attaching the seat.
Figure 20d:
frame as described on previous page (see
fi gure 19d).
20
To prevent falls and
injuries:
The portability base is a light-
The seat, back, armrests and
To assemble the base, unfold
Then attach the seat to the
Figure 20a
Figure 20b
Figure 20c
Figure 20d