Table of Contents
Advertisement
Defl ectors
The standard defl ector inserts
Figure 17a:
into the slot on the seat pad with the
hollow cup of the defl ector toward the
user.
Tip: Adding the abductor to the
standard defl ector provides stability to
the defl ector (see fi gure 17c).
The splash guard provides even
Figure 17b:
more coverage. It is held against the user
with the seatbelt or butterfl y harness.
Abductor
The padded abductor inserts
Figure 17c:
into the slot at the front edge of the seat. It
can be removed by squeezing the blue latch
(A) and pulling the abductor out.
To minimize risk of
CAUTION
infectious disease
transmission, the HTS should be cleaned
and disinfected between uses by
different patients. Inadequate cleaning
and disinfecting of equipment may
increase the risk of cross contamination.
Remove the foam pads for cleaning with
soapy water or a mild disinfectant.
Figure 17a standard defl ector
Figure 17b splash guard
Figure 17c
A
A
17
Advertisement
Table of Contents
