Hip Guides, Pan And Bowl Adapter - Rifton Z110 Product Manual

Hip guides
Figure 16a:
with a pair of hip guides that attach onto the
armrests. In the fi rst position they reduce the
seat width by 2" (5 cm), and in the second
position they reduce it by 4"(10 cm).
Slide the hip guide onto the armrest with
the notch in the hip guide (A) up and back.
Insert the armrest into the armrest slot
through the hip guide.
Pan
Figure 16b:
used as a stand-alone commode.
Figure 16c:
under the seat from the back of the chair.
Push until it latches into place. Remove it
by pulling straight back.
Bowl adapter
Figure 16d:
accommodates situations where the hole
in the HTS isn't fully over the hole in the
toilet. It is inserted at the front edge of
the hole, under the seat pad. A seat pad
must be used in conjunction with the bowl
adapter.
16
The seat width may be adjusted
The pan enables the HTS to be
Insert the pan into the tracks
The bowl adapter
Figure 16a
Figure 16b
Figure 16c
Figure 16d
A A