Table of Contents
Advertisement
Lateral supports
Lateral supports are available
Figure 15a:
with or without a chest strap for secure
upper trunk positioning. They may be
adjusted separately in height, angle and
width using the knob (B) behind the
backrest.
To attach and/or adjust lateral support (A),
loosen knob (B) and insert the key (C) into
extrusion (D) at the rear of the backrest.
Adjust height, angle and width of lateral
support to fi t client by sliding it up and
down, sliding bracket (E) along its slot
and by rotating it around the knob. When
desired adjustment is reached, tighten
knob fi rmly.
Chest strap
To prevent falls,
WARNING
strangulation or
other injuries:
• Always use seatbelt when the chest
strap is in use.
• Always ensure that chest strap is
correctly adjusted.
The chest strap threads onto
Figure 15b:
the lateral supports as shown.
The chest strap should thread
Figure 15c:
to the inside of the lateral supports.
D D
C C
B B
Figure 15a
Figure 15b
Figure 15c
A A
E E
15
Advertisement
Table of Contents
