Cleaning Hard Floors; Cord Storage - Hoover Vacuum Cleaner User Manual

CLEANING HARD FLOORS*

Attach the Velcro side of the cloth to the
1
underside of the cloth adaptor plate.
Attached the cloth adapter plate to the
foot of the cleaner.
Use the cleaner as described in 'Cleaning
2
Carpets'.
After use remove the cloth from the adapter plate
3
and wash the cloth pad in a washing machine with
a mild detergent at maximum temperature 30°c.
Do not use a fabric softener.
!
!
WARNING: Use only Hoover carpet
cleaning solution.
Using other solutions may affect
your warranty.
* Certain models only
STORAGE
Before storing the cleaner:
Turn the cleaner off and disconnect from the
electrical socket.
Empty and rinse the dirty water tank. Allow to air dry.
Press the handle release button and lower the
handle for storage.
Do not store the cleaner on a wood surface unless
the cleaner is completely dry.
- 8 -

CORD STORAGE

Turn the cleaner off and remove the plug from the
electrical socket. Wind the power cord around the
cord storage hooks.
Rotate the storage hooks to quickly release the full
length of the power cord.
CORD CLIP
Do not run over the power cord.
Clip the power cord in the cord clip at the back of the
handle to avoid accidentally running the cleaner over
the cord and causing any damage