Cleaning The Agitator - Hoover Vacuum Cleaner User Manual

CLEANING THE BRUSHBAR*
Turn the cleaner upside down. Remove
any threads or debris from the brush bar.

CLEANING THE AGITATOR*

Remove any threads or debris ensuring
the agitator can rotate freely.
!
THIS FEATURE VARIES ACCORDING
!
TO MODEL
Please check the underside of
your cleaner and follow the appropriate
instructions.
* Certain models only
CHANGING THE BRUSHBAR*
Press the dirty water tank release
1
lever and remove the dirty water
tank. Unscrew 4 retaining screws
on the top surface.
Unscrew 2 retaining screws
3
located on the underside of the
detergent nozzle. Remove the
brushbar from the nozzle.
!
!
THIS FEATURE VARIES ACCORDING TO MODEL
Please check the underside of your cleaner and
follow the appropriate instructions.
- 10 -
!
!
IMPORTANT: Switch the cleaner off and
remove the plug from the electricity supply
before dismantling cleaner
Turn the cleaner over. Remove
2
the brushbar alignment brackets.
Replace the brush bar and attach to the
4
nozzle. Attach the alignment brackets and
assemble to the cleaner.