• Do not pick up anything that is burning or HOOVER SERVICE. To ensure the continued safe and efficient operation of this smoking, such as cigarettes, matches, or appliance we recommend that any servicing or repairs are only carried out by an authorised Hoover service engineer.
Page 3
• Do not unplug by pulling on the cord. To IMMEDIATELY. To avoid a safety hazard, unplug, grasp the plug, not the cord. an authorised Hoover service engineer • Never handle the plug or appliance with must replace the power cord.
Email: customer.services@hoovercandy.com EXHAUST HOOVER FILTER Should any faults occur with your cleaner during the first CARPET 12 months, contact the Hoover Customer Helpline on the CLEANING PRE MOTOR number above. SOLUTION FILTER If you are having difficulty in obtaining filters or any other...
Page 5
PREPARING YOUR CLEANER BEFORE CLEANING A CARPET • Vacuum thoroughly. Remove the accessories from the Raise the handle to the upright position until it locks in place. • Test for colourfastness following: • Move the furniture Cleaner body Cloth adapter plate* Cloth* Test for colourfastness - Wet a white absorbent cloth with the solution.
Pour the solution into the clean water Close the filling cap on the water tank. WARNING: Use only Hoover carpet cleaning solution. Using other solution brands may cause excess foaming and will prevent the cleaner from working effectively. Using other solutions may affect your warranty.
(release trigger). WARNING: Use only Hoover carpet cleaning solution. Using other solution brands may cause excess foaming and will prevent the cleaner from working effectively. Using other solutions may affect your warranty.
After use remove the cloth from the adapter plate and wash the cloth pad in a washing machine with a mild detergent at maximum temperature 30°c. Do not use a fabric softener. WARNING: Use only Hoover carpet cleaning solution. Using other solutions may affect your warranty.
EMPTYING THE DIRTY WATER TANK CLEANING THE EXAUST FILTER release latch. WARNING: DO NOT exceed the max fill line on the dirty water tank. Press the dirty water tank release lever. Remove the dirty water tank from the cleaner, chamber. chamber.
IMPORTANT: Switch the cleaner off and CLEANING THE BRUSHBAR* CHANGING THE BRUSHBAR* remove the plug from the electricity supply before dismantling cleaner Turn the cleaner upside down. Remove any threads or debris from the brush bar. Press the dirty water tank release Turn the cleaner over.
Page 11
IMPORTANT: Switch the cleaner off and remove the plug from the electricity supply CHANGING THE AGITATOR / BELT* before dismantling cleaner. Turn cleaner over and remove 7 Remove the belt cover and safety Slide the agitator assembly out retaining screws. bar.
AC20 35601323 FIXED BRUSHBAR F4PJET 35601324 CLEANJET SOLUTION 35601351 If there is any doubt call the Hoover Customer Helpline 08444 995 599 for advice. They may be able to assist you over the telephone. FILTER KIT 35601352 - 12 -...
Quality BSI ISO 9001 Hoover’s factories have been independently assessed for quality . Our products are made using a quality system which meets the requirements of ISO 9001 Environment - WEEE Directive This appliance is marked according to the European Directive 2011/65/EC on Waste Electrical and Electronic Equipment (WEEE).
Need help?
Do you have a question about the Vacuum Cleaner and is the answer not in the manual?
Questions and answers