Custom Size Settings - Kyocera Mita S-9100DN Operation Manual

Chapter 3 Printing Through Application Software

3.1.1 Custom Size Settings

The MP tray can feed non-standard paper sizes. It can accom-
modate sizes ranging from 88 to 297 mm in width and 148 to 450
mm in length. The procedure for setting custom sizes from the
printer driver is explained below.
1
Display the printer driver's Properties dialog box from
the application software, then click Custom button.
.
2
The Custom Page Size dialog box will appear, then
click the Add button. The Edit Paper Size dialog box
will appear.
3
Enter a name for your custom size in Name.
3-3
Name settings
Paper size
Units
4
Select the unit of measurement, Inches or Millime-
ters.
5
Enter the height and width of the custom size in Size.
6
Click the OK button. The custom paper size is added to
the Customized Paper Sizes list.
7
Click the OK button. The Properties dialog box is dis-
played again.
8
Select the Custom Size from the Paper Size drop
down list.
9
In the printer's operator panel, press the MENU key
and press the 3 or 4 key until Paper Handling >
appears. Next, press the 2 key followed by the 3 or 4
key until >MP Tray Size appears. Then, get the MP
tray size to Custom.
10
Set the selected size of papers in the MP tray. In the
Print dialog box, click the OK button to start printing.