Panasonic KX-NS300 User Manual page 8

Feature Highlights
–
Making calls
–
Answering calls
–
Holding calls
–
Transferring calls (You cannot go on-hook before the transferred party answers.)
b.
The available operations using feature numbers are limited. Refer to the telephone types displayed at the
top left of each operation.
c.
The tones listed in "5.4.1 What is This Tone?" are not available for SIP phone users. Tones or the tone
types may vary depending on the type of telephone being used. For example, when you put a call on hold,
a specific tone for the SIP phone may be heard, or no tone may be heard.
d.
Any number pressed while hearing a Busy/DND/Reorder tone, such as the feature number to activate
Automatic Callback Busy, will be ignored.
e.
The operations for SIP phones may differ from the steps in this manual, and may vary depending on the
type of telephone being used.
f.
To execute an operation, some SIP phones may require that the OK button is pressed after pressing all
the buttons of the operation.
Notes for KX-WT115 PS Users
The operation and display of the KX-WT115 may differ from KX-TCA series PSs. For example, when the
KX-WT115 is not answered while using it in parallel with a wired telephone, the display of incoming call log is
different from that of the display of KX-TCA series PSs.
Notes for KX-NT300 Series, KX-NT500 Series, KX-UT Series, and S-PS Users
If the primary PBX to which your telephone is connected fails, the extension may automatically switch its
connection to a secondary PBX.
•
The time required to switch to the secondary PBX or back to the primary PBX is different depending on
the type of your telephone.
•
When the extension switches its connection to the secondary PBX, your call will be disconnected if you
are on a call.
•
Even if the primary PBX becomes available again, your telephone will not reconnect to it if you are on a
call.
•
For KX-NT300 series and KX-NT500 series users, if background music (BGM) is being played through
your telephone while it is connected to the secondary PBX, it will not reconnect to the primary PBX when
it becomes available.
Notes for KX-NT543, KX-NT546, and KX-NT560 IP-PT Users
•
While using a KX-NT543, KX-NT546, or KX-NT560 IP-PT in ECO mode, IP network transmission speed
is relatively slow and the secondary Ethernet port cannot be used. To disable ECO mode, consult your
dealer.
Trademarks
•
Microsoft and Outlook are either registered trademarks or trademarks of Microsoft Corporation in the United
States and/or other countries.
•
The Bluetooth
®
of such marks by Panasonic Corporation is under license.
•
All other trademarks identified herein are the property of their respective owners.
•
Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation.
8 User Manual
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use