•
The system has two modes: (1) FWD/DND Cycle Switch Mode and (2) FWD/DND Setting
Mode. Ask your manager what mode your system is in if you are not sure.
For KX-UT series SIP phones, only FWD/DND Setting Mode is supported.
(1) When in FWD/DND Cycle Switch Mode:
Pressing the FWD/DND button (fixed button) while in idle status will cycle the setting as shown
below:
FWD
(2) When in FWD/DND Setting Mode:
Pressing the FWD/DND button (fixed button) while in idle status allows you to switch the
FWD/DND status and set the FWD destination (refer to "
FWD/DND Button").
Note
A FWD/DND button (customised button) is always in FWD/DND Cycle Switch Mode: the
mode cannot be changed.
•
Transferred outside calls are also forwarded to the destination assigned for outside calls.
•
When intercom calls are set to be handled differently from outside calls (forwarding type,
forward destination), we recommend establishing buttons for both FWD/DND—Outside calls
and FWD/DND—Intercom calls, and/or Group FWD—Outside calls and Group
FWD—Intercom calls, because:
a.
the light patterns of the FWD/DND—Both calls button (including FWD/DND button [fixed
button]) and the Group FWD—Both calls button will indicate the setting for either outside
calls or intercom calls, but not both.
Note
b.
pressing the FWD/DND—Both calls button (including FWD/DND button [fixed button]) or
the Group FWD—Both calls button will not change the FWD or DND mode for intercom
calls and outside calls separately.
Customising Your Phone
•
3.1.3 Customising the Buttons
Create or edit FWD/DND (Both calls, Outside calls, Intercom calls) buttons, or Group FWD
(Both calls, Outside calls, Intercom calls) buttons.
FWD/DND Settings Using Fixed FWD/DND Button
Using a proprietary telephone (PT) or KX-UT series SIP phone (except KX-UT670), you
can easily switch the FWD/DND status, and set the forward destination for outside/
intercom calls with the FWD/DND button (fixed button). For PT users, it is also possible
to set outside telephone numbers (e.g., your cellular phone) as forward destinations for
up to 4 Virtual PSs* in an Incoming Call Distribution (ICD) Group, to ring together with
other ICD Group members for calls to the group.
The following settings are available:
•
Switching the FWD/DND status and setting FWD destination for outside/intercom calls
DND
Off
The FWD icon on PS display reflects the setting for outside calls only.
1.6.1 Forwarding Calls
FWD/DND Settings Using Fixed
User Manual
107