Front Bezel; Removing The Front Bezel - Dell PowerEdge T310 Hardware Owner's Manual

Front Bezel

Removing the Front Bezel

1 Using the system key, unlock the front bezel (if locked).
2 Slide the release latch in the direction of the arrow and rotate the top end
3 Lift the bezel away from the chassis.
Figure 3-2. Removing or Replacing the Front Bezel
1
3
5
Downloaded from www.Manualslib.com
NOTE:
If you are removing or installing a hot-swappable hard drive, the system
may remain turned on and in the upright position during removal of the front bezel.
If you are removing or installing any other system component(s), the system should
be turned off and placed in the orientation shown in Figure 3-1.
of the bezel away from the chassis. See Figure 3-2.
1
2
3
release latch
bezel key lock
tab slots (2)
manuals search engine
5
4
2 bezel
4 bezel tabs (2)
Installing System Components
81