Installing The Cooling Shroud - Dell PowerEdge T310 Hardware Owner's Manual

Figure 3-6. Removing and Installing the Cooling Shroud
1
3
5

Installing the Cooling Shroud

1 Carefully lower the cooling shroud into the system holding by the
2 Ensure that no cables are pinned under the edges of the cooling shroud.
3 Secure the cable into the bracket on the side of the cooling shroud.
4 Replace the expansion card stabilizer. See "Installing the Expansion Card
5 Close the system. See "Closing the System" on page 86.
Downloaded from www.Manualslib.com
5
4
cooling shroud
expansion card stabilizer touch
points (2)
cooling shroud touch point
touch point.
Stabilizer" on page 87.
manuals search engine
1
2 expansion card stabilizer
4 cable bracket
Installing System Components
2
3
89