Dell PowerEdge T310 Hardware Owner's Manual page 122

8 When the front of the card is fully seated, the plastic standoffs snap over
the edge of the card.
Figure 3-20. Installing or Removing an iDRAC6 Enterprise Card (Optional)
6
1 iDRAC6 Enterprise card
3 VFlash SD card
5 retention standoff tabs (2)
9 Replace the cooling shroud. See "Installing the Cooling Shroud" on
page 89.
10 Replace the expansion card stabilizer. See "Installing the Expansion Card
Stabilizer" on page 87.
11 Close the system. See "Closing the System" on page 86.
12 Reattach any peripherals and connect the system to an electrical outlet.
13 Turn on the system and attached peripherals.
122
Downloaded from www.Manualslib.com
1
5
Installing System Components
manuals search engine
2 3
4
2 VFlash media slot
4 retention standoff posts (2)
6 iDRAC6 Enterprise card connector