PCI IRQ Assignment Screen
Option
<PCIe device>
Serial Communication Screen
Option
Serial Communication
(On without Console
Redirection default)
Serial Port Address
External Serial Connector
(Serial Device1 default)
Failsafe Baud Rate
(115200 default)
Remote Terminal Type
(VT100/VT220 default)
Redirection After Boot
(Enabled default)
Downloaded from
www.Manualslib.com
Description
Use the <+> and <-> keys to manually select an IRQ
for a given device, or select Default to allow the BIOS to
select an IRQ value at system startup.
Description
Options are On without Console Redirection, On with
Console Redirection via COM1, and Off.
Specifies the address of the serial ports.
Specifies whether Serial Device1, Serial Device2,
or Remote Access Device has access to the external
serial connector.
Displays the failsafe baud rate used for console
redirection. This rate should not be adjusted.
Options are VT100/VT220 or ANSI.
Enables or disables BIOS console redirection after the
operating system boots.
Using the System Setup Program and UEFI Boot Manager
manuals search engine
65