Toshiba e-studio 207l Troubleshooting Manual page 32

1 TROUBLESHOOTING FOR THE HARDWARE
Open the cover holding the handle of the Bridge Unit.
3
When the Hole Punch Unit MJ-6104 is installed, proceed to step
5.
Remove the misfed paper.
4
Proceed to step 8.
When the Hole Punch Unit MJ-6104 is installed
5 Open the Hole Punch Unit cover.
6 Turn the green knob to get the misfed paper out.
7 Close the Hole Punch Unit cover.
30 Clearing a Paper Misfeed