Using Command Center; System Requirements - Kyocera KM-1820 Advanced Operation Manual

System Requirements

ADVANCED OPERATION GUIDE

8 Using COMMAND CENTER

COMMAND CENTER refers to the web home page that is installed in the machine
from which you can verify the operating status of the machine and make settings
related to security, network printing, e-mail transmission and advanced networking.
If the machine is used on a TCP/IP network and has a valid IP address, it may be
managed from any web browser. The browser allows configuration of all machine
settings, however, unlike the AdminManager, the browser cannot create NetWare
print objects. If a browser is used for NetWare configuration, then NWAdmin must
also be used to create the NetWare print objects.
The COMMAND CENTER home page can only be accessed from a PC if the TCP/
IP protocol is installed on the PC and the IP address has been configured for the
machine.
Required operating systems (OS) for using COMMAND CENTER:
• Microsoft Windows 98SE/ME/2000/XP and Microsoft Windows NT 4.0
• Apple Macintosh OS X 10.x
The COMMAND CENTER web page has been tested with the following web
browsers.
OS
Microsoft Windows
Apple Macintosh
†. Due to the Macintosh Internet Explorer display restriction, some or all of
the elements in the drop down list may appear in English.
Web Browser
Microsoft Internet Explorer 5.5 and 6.0
Netscape 6.2 and 7.1
Opera 7
Mozilla 1.5
Microsoft Internet Explorer 5.2
Netscape 7.1
Safari 1 (OS X 10.2 and later)
†
8-1