Kyocera KM-1820 Advanced Operation Manual page 105

Using COMMAND CENTER
Item
NetWare Protocol
Bindery Mode
Frame Type
File Server (Primary)
NDS Tree
NDS Context
Print Server Mode
Print Server Name
Queue Polling Interval
Password (optional)
Remote Printer Mode
Remote Printer Name
Job Timeout
8-20
Advanced > Protocols > Netware
This printing system supports both NDS and bindery printing in either print server
mode or remote printer mode.
NetWare setup requires installation of the following client software and logon with
Administrator Privileges. If you are unsure, please contact your network
administrator.
With Novell Client, creation of the NetWare print objects with the AdminManager
NetWare Setup Wizard requires the NetWare Client from Novell. For NetWare
printing, you may use the NetWare Client from either Novell or Microsoft.
For Admin Privileges, network operations (creating queues etc.) require 'admin' or
'supervisor' privileges (or equivalent). Certain portions of AdminManager may be
inoperable if you attempt those operations without sufficient privileges.
Description
Enables or disables the Network Protocol.
Enables or disables Bindery Mode.
Sets the Frame type. You can choose from Auto, 802.3, Ethernet-II, SNAP or
802.2.
Enter the name of the primary File Server to use.
Enter the name of the NDS Tree.
Enter the NDS Context.
Enables or disables Print Server Mode.
Enter the Print Server Name.
Enter the Queue Polling Interval in seconds.
Enter the Password, if required. Login to NetWare will be successful only if the
password set here matches the Print Server password set within the NetWare
utilities.
Enables or disables Remote Printer Mode.
Enter the name of the remote printer.
Enter the timeout in seconds.
ADVANCED OPERATION GUIDE