Kyocera KM-1820 Advanced Operation Manual page 108

Item
Recipient # Address
Subject
Event Reports Items
Event Report Interval
Event Reports Items
Event Report Interval
Send
Item
POP3 Protocol
Check Interval
Run once now
Domain Restrictions
ADVANCED OPERATION GUIDE
Advanced > E-mail > SMTP > Recipient[#]
You can use this to enter details for each of three SMTP recipients.
Description
Enter the e-mail address for this recipient.
You can enter the information that you want to appear in the subject field of the e-
mail. the subject can include the printer model, serial number, MAC address, host
name and IP address by entering any of the following conversion strings:
- %printer = Model
- %serial = Serial Number
- %etheraddr = MAC Address
- %host = Host Name
- %ip = IP Address
Choose the events you want to be reported. These events are:
- Add Paper
- Low Toner
- Add Toner
- Cover Open
- Paper Jam
- All Other Errors
Enter the interval between sending reports when at least one of the events occur.
Check the report items that you want to be scheduled.
Choose the frequency and timing of the scheduled reports.
Sends a report once when pressed.
Advanced > E-mail > POP3 > General
To use the e-mail function, the printing system needs connection to an e-mail server
using the POP3 protocol.
Description
Enables or disables POP3 protocol. To use e-mail, this protocol must be enabled.
Enter the time.
Runs the protocol to receive once for each press.
Enter the domain names that can be permitted or rejected. You can also specify
the e-mail addresses.
Using COMMAND CENTER
8-23