Ip Address Setting - Kyocera KM-1820 Advanced Operation Manual

Printer Settings
System Menu/
Counter
or
System Setting
Enter
or
Network Setting
Enter
or
TCP/IP Setting
Enter
or
IP Address
Enter
3-4

IP Address Setting

The IP address that should be registered here will differ depending upon your
network environment. Check with your network administrator before performing this
setting. Be sure that DHCP is Off and TCP/IP is On.
1
Access IP Address.
If you are unsure how to use this route map refer to Accessing Menu Items on
page vii.
2
Use the numeric keys to enter each segment of the IP address in turn,
pressing or [*.] to move between segments.
3
Press Enter on completion. The display shows Completed and returns to the
TCP/IP Setting screen.
If you make an error in entering a portion of the IP address, press
the previous block of digits and re-enter the correct number.
4
Register the Subnet Mask. Refer to Subnet Mask Setting on page 3-5.
ADVANCED OPERATION GUIDE
to return to