Kyocera FS-C5100DN Operation Manual page 37

Printing Operation
Custom Mode
Use Custom Mode if you want to specify the printer port and select the
software to be installed.
For example, if you do not want fonts installed on your computer to be
replaced, select Custom Mode and deselect the Fonts checkbox in the
installation window.
1
Select Custom Mode.
2
Following the instructions in the install wizard window, select the
software packages to be installed and the specify the port, etc.
For details, refer to Custom Installation in the printer driver operation
manual on the CD-ROM.
Installation on a Macintosh
1
Turn on the printer and the Macintosh.
2
Insert the included CD-ROM (Product Library) into the CD-ROM
drive.
3
Double-click the CD-ROM icon.
4
Double-click either OS X 10.2 and 10.3 Only or OS X 10.4 or higher
depending on your Mac OS version.
5
Double-click Kyocera OS X x.x.
2-13