Kyocera FS-C5100DN Operation Manual page 29

ID
_
Password
_
>NetWare
On
>AppleTalk
On
>IPP
Off
>SSL Server
Off
>IPSec
Off
Printing Operation
3
Press . Each time you press
to the explanations below when specifying the settings.
If you are using NetWare, AppleTalk, IPP, SSL Server or IPSec
to connect to a network, you must enter an administrator ID. By
default, the administrator ID is the numeric part of your printer's model
name. If you use FS-C5300DN, enter "5300".
If you are using NetWare, AppleTalk, IPP, SSL Server or IPSec
to connect to a network, you must enter an administrator password.
By default, the administrator password is the numeric part of your
printer's model name. If you use FS-C5300DN, enter "5300".
Set this item to On when you connect to a network using NetWare. In
>
submenu, frame mode can be selected from Auto, 802.3,
Ethernet-II, SNAP and 802.2.
AppleTalk must be activated (On) for networking with Macintosh
computers.
Set this item to On when you connect to a network using IPP.
Set this item to On when you connect to a network using SSL
>
Server. Submenu has items including DES, 3DES, AES, IPP over
SSL and HTTPS.
Set this item to On when you connect to a network using
Continued on next page.
or , the selection changes. Refer
IPSec .
2-5