Kyocera FS-C5100DN Operation Manual page 26

Network
>TCP/IP
Off
>TCP/IP (IPv6) >
Off
2-2
Changing Network Interface Parameters
This printer supports TCP/IP, TCP/IP (IPv6), NetWare, AppleTalk, IPP,
SSL Server, IPSec protocols and Security Level. (For details refer to
Advanced Operation Guide.)
Note After all network related settings have been done, turn
the machine OFF and ON again. This is mandatory to make
the settings effective!
TCP/IP, TCP/IP (IPv6) settings
1
Press [MENU].
2
Press or
>
3
Press . Each time you press
to the explanations below when specifying the settings.
Set this item to On when you connect to a network using TCP/IP.
>
Submenu has items including DHCP, IP Address, Subnet Mask,
Gateway and Bonjour.
Set this item to On when you connect to a network using TCP/IP
(IPv6). Submenu has items including RA(Stateless)and
DHCPv6.
repeatedly until Network > appears.
or , the selection changes. Refer
Printing Operation