Troubleshooting
Printed Results
Dirt on the top edge or back of the paper
Characters out of position
4-6
Corrective Action
Check the paper ramp.
Open the printer left cover and check for toner on the
paper ramp. Clean the paper ramp using a soft, dry, lint-
free cloth. Refer to Toner Container Replacement on page
3-3.
Check the transfer roller.
Open the printer left cover
1 and check the transfer
roller.
If the transfer roller is dirty
with toner, try printing
several pages.
Check the file or program.
Check whether the problem is being caused by a
PRESCRIBE command error. If the problem occurs only
with a specific file or program, the most likely cause is an
error in a parameter to a command or command syntax.
Transfer Roller
OPERATION GUIDE