Indicators; Keys - Kyocera FS FS-1020D Operation Manual

1.1.1

Indicators

Reference Name
1 Ready indicator
(Green)
2 Data indicator
(Green)
3 Attention
indicator
4 Toner indicator
Table 1-1
1.1.2

Keys

Reference Name
5
(Cancel key)
6
(Go key)
Table 1-2
Refer to the following table for the name and description of each indicator.
The same indicator can have a variety of meanings, depending on the speed
at which it is flashing. For details, see
Status
Lit
Flashing
Off
Lit
Flashing
Lit
Flashing
(Red) Off
Lit
Flashing
(Red)
Refer to the following table for the name and description of the basic
functions of each key.
Function
key Cancels printing in progress when pressed for 1 second or more.
key • Switches between online and offline when pressed for less than 3 seconds.
• Depending on the error message displayed in the KM-NET for Clients, there
are cases where operation will continue after pressing this key. If such a
message appears, operation resumes when this key is pressed.
(The KM-NET for Clients utility is used for making printer setting from a
computer and is contained on the Kyocera Mita Software Library CD-ROM
that is supplied with the printer. For details, see the
Operation
• Prints a standard status page
than 10 seconds.
• Prints a service status page
† For a full description of the standard status page, see the next page.
†† The service status page is used for service purposes.
Meaning
Indicates online status (printing is possible).
• An error has occurred, but printing resumes when the
key is pressed.
• Offline status. You cannot print, but the printer can receive
data.
• The printer is in sleep mode.
Printing has stopped because an error has occurred.
The printer is processing data.
The printer is receiving data.
The printer cover is open.
• A paper jam has occurred.
• The paper cassette is not inserted properly or the paper has
run out.
The printer status is normal.
The printer has stopped because the toner is exhausted.
The toner is running low.
Guide.)
†
when pressed for 3 seconds or more and less
††
when pressed for 10 seconds or more.
1-3
Chapter 3.
KM-NET for Clients
Operator Panel