Kyocera FS FS-1020D Operation Manual page 46

4
Use the following procedure that corresponds to the status of the
jammed paper, in order to remove that paper.
(A) If the leading edge of the jammed paper has been fed further into
the printer than the metal registration roller, remove the jammed
paper by its leading edge.
(B) If the paper has not been fed as far as the metal registration
roller, remove the jammed paper from the MP tray side.
(A)
Registration
Roller(Metal)
Figure 3-14
3-21
Paper Jam Removal
(B)
Registration
Roller(Metal)