Sleep Mode - Kyocera FS FS-1020D Operation Manual

Kyocera operation guide page printer fs-1020d
Hide thumbs Also See for FS FS-1020D:
Table of Contents

Advertisement

Glossary

Sleep mode

This mode is activated after a specified amount
of time elapses. The printer goes into economy
mode and a minimum amount of power is
consumed. You can change the amount of time
before the printer goes into sleep mode from the
KM-NET for Clients. The default setting is 5
minutes.
Status page
This lists printer conditions, such as the printer's
memory, the total number of copies printed, and
paper source settings. You can print the status
page by pressing the
key for 3 seconds or
more.
USB (Universal Serial Bus)
An interface standard for low to middle speed
serial interfaces. This printer supports Full-
Speed USB 2.0. The maximum transfer rate is 12
Mbps and the maximum cable length is 5 meters
(16 feet).
Glossary-4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fs 1020d - b/w laser printer

Table of Contents