Kyocera FS FS-1020D Operation Manual page 55

Kyocera operation guide page printer fs-1020d
Hide thumbs Also See for FS FS-1020D:
Table of Contents

Advertisement

Special Paper
Postcards
Fan the stack of postcards and align the edges before loading them in the
MP tray. Make sure the postcards you are going to set are not curled.
Feeding curled postcards may cause paper jams.
Some postcards have rough edges on the back (those are created when the
paper is cut). In this case, put the postcards on a flat place and rub the
edges with, for example, a ruler to smooth them.
Figure 4-3
Envelopes
The printer can print on envelopes using paper with a basis weight of 60 to
2
79 g/m
(16 to 21 lb/ream). Envelopes must be manually fed.
An envelope is a more complex object than a single sheet of paper. For this
reason, it may not be possible to obtain consistent printing quality over the
entire envelope surface.
Many envelopes have a diagonal grain orientation. (See
Paper Grain
on
page 4-5.) This orientation is more likely to wrinkle and crease on its way
through the printer. Before purchasing envelopes for use with the printer,
test a sample to verify the envelope's suitability.
Do not use envelopes that have an encapsulated liquid adhesive.
Avoid long printing runs consisting of envelopes only. Extensive envelope
printing can cause premature printer wear.
To avoid jamming due to curled envelopes, do not leave more than
approximately 10 printed envelopes stacked in the paper trays during
multiple envelope printing.
4-9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fs 1020d - b/w laser printer

Table of Contents