Disassembling The Lower Case - Yamaha F50A Service Manual

È For USA and Canada
É For worldwide
CAUTION:
Do not reuse the bearing, always replace
it with a new one.
Slide hammer and adapters 2: YB-06096
Stopper guide plate 3: 90890-06501
Stopper guide stand 4: 90890-06538
Bearing puller 5: 90890-06535
Bearing puller claw 1 6: 90890-06536

Disassembling the lower case

1. Remove the taper roller bearing outer
race and shim(s).
È For USA and Canada
É For worldwide
62Y3A11
Drive shaft and lower case (T50/FT50B, FT50C)
NOTE:
Install the claws as shown.
Slide hammer and adapters 1: YB-06096
Bearing outer race puller 2: 90890-06523
Outer race puller claw A 3: 90890-06532
2. Remove the drive shaft bearing outer
race, shim(s), and drive shaft sleeve.
È For USA and Canada
É For worldwide
NOTE:
Install the claws as shown.
Slide hammer and adapters 4: YB-06096
Stopper guide plate 5: 90890-06501
Stopper guide stand 6: 90890-06538
Bearing puller 7: 90890-06535
Bearing puller claw 1 8: 90890-06536
1
2
3
4
5
6
7
8
I
6-62