Removing The Propeller Shaft Housing Assembly; Disassembling The Propeller Shaft Housing - Yamaha F50A Service Manual

LOWR
Removing the propeller shaft
housing assembly
1. Straighten the claw washer tabs a, and
then remove the ring nut and claw
washer.
Gland nut wrench 1: YB-34447
Ring nut wrench 3 1: 90890-06511
Ring nut wrench extension 2:
90890-06513
2. Pull out the propeller shaft housing
assembly.
È For USA and Canada
É For worldwide
6-53
Lower unit
Bearing housing puller 3: YB-06207
Universal puller 4: YB-06117
Bearing housing puller claw L 5:
90890-06502
Stopper guide plate 6: 90890-06501
Center bolt 7: 90890-06504
Disassembling the propeller shaft
housing
1. Remove the reverse gear and thrust
washer.
È For USA and Canada
É For worldwide
Slide hammer and adapters 1: YB-06096
Bearing separator 2: 90890-06534
Stopper guide plate 3: 90890-06501
Stopper guide stand 4: 90890-06538
Bearing puller 5: 90890-06535
Bearing puller claw 1 6: 90890-06536
62Y3A11