Assembly; Disassembling The Lower Case Assembly; Inspecting The Drive Shaft Sleeve; Inspecting The Needle Bearing - Yamaha SX150C Service Manual

LOWR
LOWER CASE ASSEMBLY
(REGULAR ROTATION MODELS)
6165
6170
6175
6180
DISASSEMBLING THE LOWER CASE

ASSEMBLY

1. Remove:
• Needle bearing
Bearing/oil seal attachment .... 1
YB-06194 / 90890-06636
Driver rod .................................. 2
YB-06071 / 90890-06605
2. Remove:
• Tapered roller bearing outer race
Slide hammer............................ 1
YB-06096
Bearing puller............................ 2
90890-06523
Large universal claws............... 3
90890-06532
INSPECTING THE DRIVE SHAFT
SLEEVE
Inspect:
• Drive shaft sleeve
Damage/wear → Replace.

INSPECTING THE NEEDLE BEARING

Inspect:
• Needle bearing
Pitting/rumbling → Replace.
ASSEMBLING THE LOWER CASE
ASSEMBLY
1. Install:
• Tapered roller bearing outer race
Bearing/oil seal attachment .... 1
YB-06258 / 90890-06619
Driver rod .................................. 2
YB-06071 / 90890-06605
2. Install:
• Needle bearing
Bearing/oil seal attachment .... 1
YB-06246 / 90890-06636
Bearing puller............................ 2
YB-06029 / 90890-06523
Needle bearing installation
plate ........................................... 3
YB-06247
6-24
E